TLR 8IGHT 4.0 Race Kit: 1/8 4WD Nitro Buggy

FORUDBESTILLING! Udkommer start december 2015

Key Features

Durable 4mm hard-anodized 7075 T-6 aluminum chassis
Improved suspension geometry
Reduced front driveshaft angle
Ball bearing throttle and brake actuators
Large-bearing spindles and hubs
Revised chassis side guards
Larger engine mount that reduces chassis flex
15° caster blocks with adjustable spindle height
Aluminum shock caps with threaded bleeder holes
Molded driveshaft and dog bone boots
Aluminum shock towers with updated camber link and shock location holes
Weight ballast-ready to meet ROAR minimum weight requirement

Vehicle Type:    Buggy
Completion Level:    Kit
Size/Scale:    1/8
Length:    19.6 in (497mm)
Width:    12.1 in (308mm)
Height:    7.1 in (180mm)
Weight:    Varies on equipment used
Ground Clearance:    2.4 in (60mm)
Wheelbase:    12.7–12.9 in (323–327mm)
Track:    12.1 in (307mm)
Front Track:    12.0 in (305mm)
Rear Track:    12.1 in (307mm)
Chassis:    4mm, 7075 T-6 Aluminum, Hard Anodized
Suspension:    Independent
Shock Type:    Aluminum, Oil-Filled
Drivetrain:    4WD
Differential:    Sealed viscous filled gear differential
Wheel Type:    Dish
Wheel Diameter:    3.3 in (83.5mm)
Wheel Width:    1.7 in (42mm)
Engine Size:    .21–.31 size engine (not included)
Pinion:    13T
Spur Gear:    48T
Gear Pitch:    1.0 Module
Internal Gear Ratio:    3.23:1
Final Drive Ratio:    11.9:1
Speed Control:    Not included
Radio:    Not included
Servos:    Not included
Batteries:    Not included
Charger:    Not included
Brakes:    Not included
Body:    8 3.0 Cab Forward, unpainted
Ball Bearings:    Yes – Throughout
Fuel Tank Capacity:    4.2 oz (125cc)
Approximate Assembly Time:    3–5 Hours