Free shipping Free shipping on purchase over 700 DKK*
5 stars on GoogleWe strive for satisfied customers 
Visit our store hereØverødvej 5, 2840 Holte
The
Park 480 Brushless Outrunner motor is designed to deliver clean and
quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850
grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams),
or models requiring up to 275 watts of power. It’s an especially good
match for E-flite''s Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF
(EFL2075), and it would provide extreme power for sport park
flyers such as the Mini Ultra Stick ARF (EFL2250).
Specifically
this 1020Kv option can handle more current than the 920Kv version, so
it is more efficient when matched with the Thunder Power Pro-Lite
cells.
Product Specifications
| Type: | Brushless outrunner |
| Size: | Park flyer |
| Bearings or Bushings: | One 4 x 9 x 4mm Bearing, and One 4 x 10 x 4mm Bearing |
| Wire Gauge: | 16 |
| Recommended Prop Range: | 10x7 to 12x6 |
| Voltage: | 7.2 to 12 |
| RPM/Volt (Kv): | 1020 |
| Resistance (Ri): | .06 ohms |
| Idle Current (Io): | 1.10A @ 8V |
| Continuous Current: | 22A |
| Maximum Burst Current: | 28A (15 sec) |
| Cells: | 6–10 Ni-Cd/Ni-MH or 2–3S Li-Po |
| Speed Control: | 25A to 40A brushless |
| Weight: | 87 g (3.1 oz) |
| Overall Diameter: | 35mm (1.40 in) |
| Shaft Diameter: | 4mm (.16 in) |
| Overall Length: | 33mm (1.30 in) |
