18-Channel Dual Battery FASSTest™/FASST™ 2-4GHz Receiver

Full range up to 18-channels PWM or S.BUS/S.BUS2 set up. For all types and sizes of aircraft models (airplane, helicopter, glider, multi rotor) - glow, gasoline & electric.

The R7018SB receiver features bi-directional communication with a FASSTest Futaba transmitter using the S.BUS2 port. Using the S.BUS2 port an impressive array of telemetry sensors may be utilized. It also includes both standard PWM output ports and S.BUS output ports.

The R7018SB has a Dual Battery System. Multiple servos can be driven by connecting 2 large capacity batteries. Even if the voltage of one battery drops, the other battery allows safe flight. The R7018SB can also be switched the FASST-Multi-ch System
 

• FASSTest-2.4GHz Bidirectional Communication System
• FASST-Multi-ch 2.4GHz
• Dual Battery
• S.BUS2 / S.BUS Port
• 18 Channels for Conventional System Receiver

Features:

• FASSTest 2.4GHz (18ch/12ch mode) Bidirectional communication system
• FASST 2.4GHz (Multi-ch mode)
• Dual Antenna Diversity
• Dual Battery system with T-Connectors
• Dimensions: 54.6 x 40 x 16 mm
• Weight w/o case: 42 g
• Power Requirements: 6.0V to 7.4V (Voltage Range: 4.8 to 8.4V)
• S.BUS/S.BUS2 compatible ports
• 18 PWM Output ports
• Battery Failsafe Voltage
• Extra Voltage Port: 0~70V DC (Use FPEBB0141 - CA-RWIN-700)
• Resolution: 2.048steps
• Speed (Frame Rate):
• 6.3ms / 15ms - FASSTest (12ch / 18ch)
• 7ms / 14ms - FASST (High Speed/ Normal)

Note:

• For those that use non-Futaba servos with the R7018SB receiver we highly recommend to use the optional RX Capacitor 1800uF that will mitigate issues when using non-Futaba servos 

Includes:

• R7018SB Receiver with dual male T-Plug battery connectors
• On/Off Switch harness
• Two female ultra T-Plug connectors (for the batteries)
• Heat shrink tubing
• Screwdriver